Wayne Dalton Torquemaster Springs: Replacement and FAQs
If you have a Wayne Dalton garage door, chances are you have heard of the Torquemaster or torquemaster plus spring system. The Torquemaster system is a unique spring system designed by Wayne Dalton that uses a tightly wound spring inside a steel tube instead of the traditional torsion spring found in most garage doors. In this article, we will discuss the Torquemaster spring system, how it differs from traditional torsion springs, and how to replace them if needed.
What are Wayne Dalton Torquemaster Springs?
The Torquemaster system is a type of garage door spring that was developed by Wayne Dalton. Unlike traditional torsion springs, which are located above the garage door and exposed, the Torquemaster springs are located inside a steel tube above the door. The springs are wound tightly inside this steel tube, which helps to protect them from damage and makes them much safer to work with.
How do Torquemaster Springs differ from Garage Door Torsion Springs?
The biggest difference between Torquemaster springs and torsion springs is their size and ease of winding / installation. Torsion springs are located above the garage door, while Torquemaster springs are located inside a steel tube above the garage door. This makes Torquemaster springs safer to work with because if they break or snap they are contained in the steel tube, and they are wound using a drill instead of torsion spring winding bars.
Another difference is the way the springs are wound. Torsion springs are wound tightly and can be dangerous to handle if they are not properly secured. Torquemaster springs, on the other hand, are wound inside a steel tube with a drill, which helps to keep them secure and makes them much easier to handle.
Can I Replace Torquemaster Springs Myself?
Yes, you can replace Torquemaster springs yourself. In fact, the Torquemaster system was designed to be easy to install and replace without the need for professional help. However, it is important to follow our instructions carefully and to use the proper tools and safety equipment.
When replacing Torquemaster springs, we recommend purchasing all of the related parts. Typically if you are replacing a torqumaster spring the other spring parts like the winding assembly and cable drum assembly. We have put these parts together with a torquemaster part replacement kit. This kit will come with everything you need to replace the spring hardware, cable drum assembly, winding assembly, and instructions (springs purchased separately).
How do I know if my Torquemaster Springs need to be replaced?
There are a few signs that your Torquemaster springs may need to be replaced. If you notice that your garage door is making unusual noises or is not opening and closing smoothly, it may be a sign that the springs are wearing out. You may also notice that the garage door won’t open with the opener or even manually, which can be a sign of broken or damaged springs.
Conclusion
In summary, the Wayne Dalton Torquemaster spring system is a unique and innovative spring system that offers many benefits over traditional torsion springs. The springs are located inside the steel tube, which makes them safer and easier to handle. The Torquemaster system was designed to be easy to install and replace, so you can do it yourself with the proper tools and safety equipment. If you suspect that your Torquemaster springs need to be replaced, it is important to address the issue promptly to ensure the safety and proper function of your garage door.